How to fix patches after applying Graphene Seal
If Graphene Seal leaves patches or haze after application, wipe the affected area with a clean, damp T2 microfiber cloth, then buff with a separate clean, dry T2 cloth. Do not spray more Graphene Seal onto the patches.
Check what caused the patches
Too much product or uneven spreading can leave visible residue. Check the surface in good light and work on cool paint. If the marks existed before application or remain after cleaning, they may be a different surface problem.
Use the damp-then-dry method
1. Dampen a clean T2 microfiber cloth. 2. Gently wipe the affected section to lift and even out the residue. 3. Use a separate clean, dry T2 cloth to buff the surface clear. 4. Inspect the finish in good light.
Do not add another layer of Graphene Seal during this correction step.
Use a thin, even application next time
Shake the bottle first. Apply to clean, dry, smooth paint. Spray 2–5 light mists onto the microfiber cloth and work over about one square metre before buffing.
More product does not mean a better result. Keep your application cloth and finishing cloth clean, and change to a clean side as needed.
Common questions
Should I spray Graphene Seal again to clear haze?
No. Use a damp T2 wipe followed by a clean, dry T2 buff. Adding more product can add to the residue.
Will this remove etched water stains?
Graphene Seal is not a water-stain remover or polish. Persistent marks need to be assessed separately rather than covered with more maintenance spray.